How To Winterize A Dog Door?

How To Winterize A Dog Door

So, winter is here. Do you know what that means? It’s time to make sure your pet doesn’t get too cold! All the snow and ice outside can be a big problem for pets who like to go into the yard or roam around looking for adventure. One way to keep them safe from all of this is by installing an insulated dog door in their favorite entrance point.

Keep reading to find out how!

When it comes to your pet, you want them to be taken care of at all times. They are capable of finding adventure anywhere they go, even when you don’t intend for them to. Dogs are the best friends that anyone could ask for, and they deserve loving owners who care about their well-being.

Because of this, it is essential to install an insulated dog door that will keep the cold air out. This is especially true if your pet has a favorite spot to get into that might be more susceptible to cold weather than others. An excellent example of this would be the garage or front door of your home.

You might also like our recent review of stair ramp for dogs and decorative dog food container which is available on a separate page for your consideration.

Step 1: Cut Wooden Plywood to Fit Dog Door

The first step is to cut some wooden plywood to fit your dog door. It must be a very exact fit, as the insulation will go between the board and the actual door frame.

Measure the dog door correctly and make sure no stone remains untouched. The beauty of using wood is that you can drill holes in it if you want to. So, feel free to add a design or some color for a more personalized touch!

Step 2: Cut Insulation Foam to Fit Dog Door

Once you have the wooden boards in place, it’s time to add in the insulation. Again, there are a variety of different types that all do a similar job.

For this project, we used R-2 insulation from Thermax. It is straightforward to work with and has been tested at -40 degrees Fahrenheit. This type of insulation has the highest rating possible in the world of HVAC systems.

Step 3: Check That It Fits!

It’s time to fit the insulation into place. This might take a little bit of adjusting and a lot of patience, but it will be worth it in the end! You can do this by using a putty knife or your fingers if you prefer.

Don’t worry about small gaps, as this is going to help the insulation go in easily.

Step 4: Install Foam Insulation Around the Dog Door

Once you’ve managed to cut and fit all of this insulation, it’s time to install it around the dog door. This will require some more measurements so that everything fits just right.

After this has been done, you can use either hot glue or spray adhesive to attach them in place.

Step 5: Paint Plywood

Once the insulation has been set, you can take off the boards and paint them. Again, it’s recommended that you use an oil-based primer and exterior grade paint to help protect it from all sorts of weather conditions out there.

Step 6: Install Plywood

Finally, you can install the plywood and dog door back into their original position. The insulation will ensure that your pet is safe from the winter elements and doesn’t get too cold!

You should also check up on them regularly to ensure they are not feeling too uncomfortable with it in place.

Now, feel free to take a step back and admire all your hard work! It’s finally time to enjoy the cold winter with your furry friend.

If you enjoyed reading this article, please share it with everyone on social media. You never know who might need an insulated dog door.

Step 7: Seal the Door

The final step is to seal the dog door with some weather stripping. This is pretty easy to do, and you’ll be able to find some at any home improvement store.

It’s highly recommended that you leave this step after the insulation has been installed, as it will help everything fit in place easier.

Be sure to check in on them from time to time, as your dog might not be so happy with the door being sealed shut!

Step 8: Seal Interior Dog Door

Once you have finished with the exterior, it’s time to move on to the interior. This part maybe a little more complicated depending on what type of dog door you have installed.

You can use weather stripping around the sides and underneath to make sure it stays in place perfectly. And that’s all there is to it!

How Do I Stop Wind From Blowing In My Dog’s Door?

One common problem people face is that wind tends to blow in through the dog door. This can be very uncomfortable for your pet, and it could even affect their ability to stay warm.

There are a few steps you can take towards making sure this doesn’t happen:

Shut Your Dog Door When Not In Use: Pets should only use their dog door when needed. It would help if you tried shutting the doggy door every time you leave your home to prevent drafts from getting in.

Caulk Around Dog Door Frame: The first problem that comes up with doggy doors is that air gets into the home around the outside of it, which can cause all sorts of issues for your dog. You can solve this by using some weather stripping on the outside to keep it shut tight.

Add A Carpet Over The Dog Door: This is a relatively simple fix that you can do yourself. It doesn’t take much time at all, and it can make a big difference in how comfortable your pet is!

Invest In An Insulated Pet Door: Of course, this is a pretty expensive solution. But if you have the money to spare, an insulated pet door will keep your dog’s door draft-free and warm for them!

How Do You Keep A Dog Door From Freezing?

As we discussed earlier, your dog’s door is likely to freeze over during the winter. And while you can’t do anything about it if it does, there are a few steps you can take to make sure it doesn’t happen:

Preventing The Dog Door From Freezing – Step 1

The first thing you should do is remove any ice from the dog door. The best way to do this is by using a hairdryer.

This keeps your pet from getting injured and keeps you from dealing with wet, slushy snow that will just get tracked around your house!

Preventing The Dog Door From Freezing – Step 2

Once you get rid of any ice, you should get to work on preventing it from coming back.

Make sure your dog door is properly insulated by using weather stripping around the sides and underneath. This will prevent cold air from entering through the dog door!

Preventing The Dog Door From Freezing – Step 3

Finally, you can use heat tape to help keep the door from freezing over. This is especially important if you live in an area where it gets really cold during the winter.

Heat tape operates using electricity and usually comes with a cord that’s plugged into the wall. You can wrap this around your dog’s doorway or under their doggy house to make sure they are nice and cozy throughout the winter.

How Do You Seal A Doggie Door?

Follow few steps, and you will be able to seal a doggie door completely, so no wind cross through the door.

Step 1: Choose the Proper Sealant

One of the best ways to seal a doggie door is by using a soft silicone sealant.

This should be easy to use, comes in different colors, and can be bought at most home improvement stores!

Step 2: Apply Masking Tape to the Exterior Dog Door

First, you should remove any splinters on the exterior doggie door.

Then apply masking tape around the entire perimeter of your dog door to protect it from the sealant.

Step 3: Apply Sealant to the Dog Door

Finally, you can apply a generous amount of sealant to the exterior of your doggie door.

Be sure to leave 1/8 inch around the entire perimeter, so it doesn’t ooze into the dog’s house!

Step 4: Clean Sealant from Dog Door Frame

Be sure to wipe off any excess sealant that may have gotten onto the dog door frame.

Let your doggie door cure for about an hour before letting your pet use it again!

Step 5: Remove Masking Tape

After an hour, you can remove the masking tape and clean up your mess with a wet rag!

At this point, your doggie door should be completely sealed and ready for winter!

Step 6: Wipe Off Excess Sealant

If the sealant has gotten on the dog’s doggy door frame, you can clean it off with a wet rag.

Step 7: Seal the Interior Dog Door

Now you can seal the interior doggie door by following the same process.

It’s not necessary to use masking tape on the interior, but it doesn’t hurt either!

Step 8: Let it Dry

Let the sealant dry for an hour before letting your dog use their doggie door.

And that’s it! It would help if you had a pet door that is completely sealed to keep any drafts out during the winter months.

Related Posts